Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Renault Scenic

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Diesel fuel filter

See other generations:
Video tutorial

Here’s how to replace the diesel filter on a Renault Scenic. Start by removing the plastic cover at the bottom of the bumper with a suitable screwdriver (remove the clip), and access the front headlamp located in the bumper (as shown in the video).

After removing the container: take out the filter inside and install a new one (same size). Reassemble the container and the plastic cover under the vehicle's bumper with the attached clips.

Test the correct operation. Reattach the front clip with the necessary securing pins and lower the vehicle.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Change the Diesel Filter of the Renault Grand Scenic
How to Change the Diesel Filter of the Renault Grand Scenic
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) Today, in this brief guide, learn the procedure to remove and replace the diesel filter of the Renault Grand Scenic. First, lift the vehicle and star…
How to replace the diesel fuel filter of the Renault Scenic 1.5 dCi
How to replace the diesel fuel filter of the Renault Scenic 1.5 dCi
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Today we will discover the instructions that will allow us to disassemble and replace the diesel filter of the Renault Megane 1.5 dCi. First, we remo…
Changing the Oil Filter on Renault Scenic
Changing the Oil Filter on Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Let's replace the fuel filter on a Renault Scenic. Lift the car and secure it with a jack. Remove the plastic panel from the right wheel arch, then, …

    Frequently Asked Questions

    • Scenic 2016-2022 - Where is the fuel filter located in the 2018 Renault Scenic? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos