Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change a Bulb on a Renault Megane 3

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Headlight bulb

In today's video, we show how to replace the front headlight bulbs on a Renault Megane, third generation model produced from 2008 to 2015. First, open the engine bay of your vehicle, then, using a 10mm spanner, unscrew the two screws holding the headlight in place and extract it from its housing as shown in the video. After this, by removing the bulb covers, you will have access to all the bulbs of the front headlight, and you can replace them simply by pulling them out of their housing and disconnecting them from their connector.

Posted on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Bulb on a Renault Megane
Replacing the Bulb on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Today, you will learn how to change the dipped beam bulb on a Renault Megane 2. Open the bonnet and prop it up. For added safety, remove the ignition…
How to Change the Front Headlight Bulb on the Renault Megane
How to Change the Front Headlight Bulb on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Here are the instructions for removing and replacing the front headlight bulb on the Renault Megane in simple and quick steps. Access the front headl…
How to Change the Front Headlamp Bulb on a Renault Megane
How to Change the Front Headlamp Bulb on a Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) Discover in this guide how to remove and replace the front headlamp bulb on a Renault Megane by following these simple and quick steps. First, open t…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos