Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Window Regulator Motor on a Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Power window motor

See other generations:
Video tutorial

Below are the instructions that will allow you to reset the window regulator motor on the Renault Kangoo. First, get in the car and turn on the ignition; then lower the side window by holding the button for about ten seconds, as shown in the video.

At this point, perform the same operation to close the side window, thus memorising the command; this way, you will have reset and calibrated the window regulator motor, finally turning off the ignition and checking its correct operation afterwards.


Posted on 14 April 2026 by ScegliAuto


Related tutorials

How to Remove the Starter Motor from a Renault Kangoo
How to Remove the Starter Motor from a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Before starting, open the front bonnet of your Renault Kangoo. Begin by removing all the hoses and the air filter housing, unscrewing the respective …
Where is the fuse for the Renault Kangoo's window located?
Where is the fuse for the Renault Kangoo's window located?
Renault Kangoo (2007-2021 / MK 2, FC, FW) The Renault Kangoo has two fuse boxes inside. The first fuse box is located in the engine compartment, near the battery. The second fuse box is locat…
Replace the Starter Motor on a Renault Kangoo
Replace the Starter Motor on a Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) Removing the starter motor from a Renault Kangoo? Here’s how to take it out from the engine bay. Open the car door and pull up the engine bay release…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos