Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Scenic
  6. : How to remove the timing belt of a Renault Scenic

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Timing belt
Operation: How to remove the timing belt of a Renault Scenic

Let's see how to remove and replace the timing belt and the water pump on a Renault Scenic 2. We lift the car on a column bridge and remove the engine guard placed under the car, then disconnect the connected sleeve with pliers. to the radiator. Remove the right wheel rocker with a screwdriver. With a fixed wrench we go to loosen the belt tensioner roller and remove the belt from its seat. We unscrew the tightening pin of the tensioner roller, remove the water pump. We mount the new water pump, the belt tensioner and the belt itself and tighten everything with the socket wrench. We tighten the pins of the stone guard and put the rim back on the car.


Posted on 18 November 2023 by ScegliAuto



How to replace the timing belt on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Let's see how to replace the timing belt on a Renault Scenic. We lift the car on a pillar or jack bridge and remove the engine guard placed under the
How to replace timing belt on Scenic 1.9 dCi
Renault Scenic (2003-2009 / MK 2, Scenic 2) How do you replace the timing belt on a Scenic? Let's see how the belt and covers are removed. We lift the car onto a column bridge, remove the front
Renault Grand Scenic 1.6 timing belt replacement guide
Renault Scenic (2003-2009 / MK 2, Scenic 2) Today's guide will show us the main steps to disassemble and replace the timing belt of the Renault Grand Scenic 1.6. First of all, we open the bonne

Other guides that may interest you

    Frequently Asked Questions

    • Scenic 2016-2022 - How much does it cost to replace the timing belt on the Renault Scenic? Read Answer
    • Scenic 2016-2022 - How much does it cost to replace the timing belt in the Renault Scenic 4 1.5 DCI? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos