Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Inner Door Panel of the Renault Trafic MK2

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Car door

This guide explains how to remove the inner panel from the rear door of a Renault Trafic MK2: first, you need to remove the internal handle; the panel is secured by 10 clips that you will need to remove with a plastic tool. Once all the clips are released, the panel will detach completely from the door. It is essential to proceed with patience and care to avoid breaking the plastic clips. Since this vehicle is not brand new, the plastics may have become brittle; it is advisable to also procure some spare clips in case any should break.

Posted on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the handle of the Renault Trafic
How to remove the handle of the Renault Trafic
Renault Trafic (2001-2014 / MK 2) The removal of the rear door handle of the Renault Trafic is a fairly simple operation to perform independently. We open the rear door and unscrew th…
How to disassemble the door panel of the Renault Trafic
How to disassemble the door panel of the Renault Trafic
Renault Trafic (2014-2026 / MK 3) Today we will explain how to remove the front door panel of the Renault Trafic. To carry out this simple operation, we need to open the door in quest…
Replacing the Sliding Door Handle on the Renault Trafic
Replacing the Sliding Door Handle on the Renault Trafic
Renault Trafic (2014-2026 / MK 3) Let's see how to replace the sliding door handle on a Renault Trafic: first, you need to remove the inner door panel to access the internal mechanism…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos