Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Control Knob Bulbs in a Renault Modus

Model: Renault Modus MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Instrument panel light

Video tutorial

How to replace the bulbs for the air conditioning control knobs in a Renault Modus? In this video, see how to proceed. Disconnect the air conditioning control frames using a screwdriver (levering them out), then remove the parts from the instrument panel (as shown in the video).

Be careful not to break the plastic tabs that secure the frames. After removing the knobs from the panel, replace the bulbs or LEDs with new ones (remove the onboard computer if replacing the LEDs). Finally, reassemble all the parts in reverse order.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Replace the Climate Control Bulb on a Renault Modus
How to Replace the Climate Control Bulb on a Renault Modus
Renault Modus (2004-2013 / MK 1) To replace the climate control bulb on a Renault Modus, use a tool to lever off the plastic trim surrounding the central panel. Once the trim is remo…
How to Replace the Bulbs in a Modus
How to Replace the Bulbs in a Modus
Renault Modus (2004-2013 / MK 1) How do you replace the headlight bulbs in a Modus? Let’s look at removing the bulbs from the front headlight of the Renault car. Lift the front bonne…
Replace the Rear Light Bulbs on Renault Modus
Replace the Rear Light Bulbs on Renault Modus
Renault Modus (2004-2013 / MK 1) Replace the rear light bulbs on your Renault Modus. Open the boot lid, then use a screwdriver to remove the securing screws located at the back of th…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos