Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Renault Clio 4, turn on the ignition without starting the engine. Use the buttons at the end of the right-hand stalk, the one for the windscreen wipers, to scroll through the information on the instrument cluster display.

Press the button repeatedly until you see the maintenance range or next service message. Once you reach the correct screen, hold the button down for a few seconds until the indication starts to flash.

Continue holding it until the new maintenance interval appears and wait for the value to stop flashing. Then release the button, turn off the ignition, and turn it back on after a few seconds to check that the service light or message has been successfully reset.


Posted on 3 September 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) Good morning, today’s goal is to reset the "Service" light on your Renault Clio. Turn on the instrument panel by pressing the power button. Next, usi…
How to Reset the Service Light on a Renault Clio V
How to Reset the Service Light on a Renault Clio V
Renault Clio (2019-2026 / Clio V, Clio 5) .. Let’s see how to reset the service light on a Renault Clio V: turn on the ignition without starting the engine a.. …
How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos