Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Using the Tyre Inflation Kit on the Renault Captur

Model: Renault Captur MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Accessory kit

See other generations:
Video tutorial

Let's see how to use the repair kit on the Renault Captur: it is a kit that can only be used if the puncture is on the tread of the tyre (not on the sidewall) and if the hole is less than 4 mm in diameter. In any case, this is still a temporary repair.

Screw the adapter onto the bottle, connect the compressor hose, and plug the power lead into the car's cigarette lighter. Check the recommended pressures; start the vehicle's engine and turn on the compressor; if after 15 minutes you do not reach at least 1.8 bar, the repair is not possible, and you should call for a tow. Drive for a short distance at a speed between 12 and 37 mph to distribute the sealing liquid inside, then stop and check the pressure again.

If the pressure is below 1.3 bar, the repair has failed.


Posted on 10 September 2026 by ScegliAuto


Related tutorials

How to Use the Tyre Inflation Kit on the Renault Captur
How to Use the Tyre Inflation Kit on the Renault Captur
Renault Captur (2019-2026 / MK 2) Let’s see how to use the tyre inflation kit on the Renault Captur. To perform a repair, the puncture must not be on the sidewall of the tyre and must…
How do you reset the tire anomaly in the 2019 Renault Captur?
How do you reset the tire anomaly in the 2019 Renault Captur?
Renault Captur (2019-2026 / MK 2) Even the 2019 Renault Captur is equipped with a sticker label, located inside the fuel door, which indicates the correct tire pressure. If it turns o…
How do you reset the tire pressure warning light on the Renault Captur?
How do you reset the tire pressure warning light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) To completely remove the tire pressure sensor from the instrument panel of the Renault Captur, you will first need to inflate all the tires, bringing…

Other guides you may be interested in

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos