Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan on a Renault Megane?

Model: Renault Megane Megane 3, Megane III - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Blower motor

See other generations:
Video tutorial

To replace the cabin fan on a Renault Megane, open the glove compartment located on the passenger side: once the glove compartment is open, loosen the screws securing it and remove it completely. At this point, locate the components at the rear, including the fan: it should now be freed from the securing screws and power cables to insert the new one. After replacement, reposition the glove compartment, ensuring everything is functioning.


Posted on 23 October 2026 by ScegliAuto


Related tutorials

Removing the Air Fan on a Renault Megane
Removing the Air Fan on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Removing the air fan on a Renault Megane, let’s see how to proceed. The cabin ventilation fan is located under the dashboard. Remove the covering pla…
How to Replace the Cabin Fan Resistor on the Renault Megane
How to Replace the Cabin Fan Resistor on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Follow these steps to remove and replace the cabin fan resistor on the Renault Megane. First, get into the vehicle on the passenger side and start by…
Replacing the Cabin Fan on the Renault Megane
Replacing the Cabin Fan on the Renault Megane
Renault Megane (2002-2010 / Megane 2) This guide will show you the main steps to remove and replace the cabin fan on the Renault Megane. First, get into the vehicle and start unscrewing a…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the resistor of the passenger compartment fan of the Renault Megane 3? Read answer

How to adjust the handbrake on the Smart Fortwo?

To adjust the handbrake on the Smart Fortwo, loosen the screws securing the left rear wheel so that it can be removed: after the wheel has been removed from its seat, loosen the screws securing the corresponding brake drum, locating the shoes and the handbrake mechanism. This can be adjusted by tightening or loosening the shoes to regulate the intensity of the handbrake; once the adjustment is complete, verify that the operation has been successfully finished.

Watch the video!


by ScegliAuto

More videos