Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Resistor on the Renault Megane

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010

See other generations:
Video tutorial

Follow these steps to remove and replace the cabin fan resistor on the Renault Megane. First, get into the vehicle on the passenger side and start by removing the plastic cover located at the bottom to access the cabin fan and the resistor.

Next, disconnect the electrical connector to remove the resistor connected to the cabin fan, as shown in the video. Now, install the new original resistor and check the operation of the air conditioning fan!


Updated on 10 July 2026 by ScegliAuto


Related tutorials

How to Replace the Fan Resistor on a Renault Megane
How to Replace the Fan Resistor on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Learn how to replace the fan resistor on a Renault Megane. Watch this video for disassembly instructions. Use a lever to remove the plastic next to t…
Replacement of the Renault Megane heating resistor
Renault Megane (2002-2010 / Megane 2) In this guide we will see the instructions that will allow us to disassemble and replace the heating resistance of the Renault Megane's cabin. First,…
Removing the Fan Resistor on Renault Megane
Removing the Fan Resistor on Renault Megane
Renault Megane (2002-2010 / Megane 2) Is the air fan resistor on your Renault Megane damaged? Here’s how to replace it. Open the front door (passenger side) and remove the trim: use a lev…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the horn of a Renault Megane located? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos