Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fan Resistor on Renault Megane

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Blower motor

See other generations:
Video tutorial

Is the air fan resistor on your Renault Megane damaged? Here’s how to replace it. Open the front door (passenger side) and remove the trim: use a lever to detach the plastic cover under the dashboard, then remove the glove compartment. Using a screwdriver, unscrew the fan cover (where the air fan is located).

Remove the plastic cover of the fan with a screwdriver. Unscrew the fan securing screws and disconnect the connectors.

Insert the new air fan and connect the power supply. Refit the fan cover and the engine soundproofing panel.

Reassemble the dashboard plastics.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan Resistor on the Renault Megane
How to Replace the Cabin Fan Resistor on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Follow these steps to remove and replace the cabin fan resistor on the Renault Megane. First, get into the vehicle on the passenger side and start by…
How to Replace the Fan Resistor on a Renault Megane
How to Replace the Fan Resistor on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Learn how to replace the fan resistor on a Renault Megane. Watch this video for disassembly instructions. Use a lever to remove the plastic next to t…
Replacing the Resistor on a Renault Megane
Replacing the Resistor on a Renault Megane
Renault Megane (2002-2010 / Megane 2) How to replace the cabin fan resistor on a Renault Megane? Get a screwdriver or a cordless drill: open the glove compartment and unscrew the fastenin…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the resistor of the passenger compartment fan of the Renault Megane 3? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos