Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Resistor on a Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Checks and maintenance

How to replace the cabin fan resistor on a Renault Megane? Get a screwdriver or a cordless drill: open the glove compartment and unscrew the fastening screws around the perimeter (remove it). Once this is done, pull out the glove compartment and disconnect the power cables from the resistor. Extract the fan resistor from its seat; insert the new part into its housing. Finally, reassemble all the components removed from the glove compartment as they were taken apart.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Fan Resistor on the Renault Megane
How to Replace the Cabin Fan Resistor on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Follow these steps to remove and replace the cabin fan resistor on the Renault Megane. First, get into the vehicle on the passenger side and start by…
Replacement of the Renault Megane heating resistor
Renault Megane (2002-2010 / Megane 2) In this guide we will see the instructions that will allow us to disassemble and replace the heating resistance of the Renault Megane's cabin. First,…
How to Replace the Fan Resistor in a Renault Megane
How to Replace the Fan Resistor in a Renault Megane
Renault Megane (2002-2010 / Megane 2) Start by removing the side covers of the glove compartment and open the glove box door. Next, unscrew and remove the six screws that you have uncover…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the internal temperature sensor located in the Renault Megane? Read answer
    • Megane 2008-2015 - What does the Renault Megane "Risk of engine failure" label mean? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos