Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Renault Megane heating resistor

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010

See other generations:
This video is currently unavailable

In this guide we will see the instructions that will allow us to disassemble and replace the heating resistance of the Renault Megane's cabin. First, we open the front door on the driver's side and start by removing the plastic cover found at the bottom right, next to the pedals; we then disconnect the electrical connector of the heating resistance, in order to remove it, as shown in the video.

At this point, we install the new resistance, then check the operation of the cabin fan and heating; finally, we reassemble the plastic partition.


Posted on 29 July 2025 by ScegliAuto


Related tutorials

Where is the Heating Resistor Located in the Renault Megane?
Where is the Heating Resistor Located in the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, you will see where the heating resistor is located in the Renault Megane and how to proceed if you need to replace it, a very simple a…
How to Replace the Cabin Fan Resistor on the Renault Megane
How to Replace the Cabin Fan Resistor on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Follow these steps to remove and replace the cabin fan resistor on the Renault Megane. First, get into the vehicle on the passenger side and start by…
Replacing the Resistor on a Renault Megane
Replacing the Resistor on a Renault Megane
Renault Megane (2002-2010 / Megane 2) How to replace the cabin fan resistor on a Renault Megane? Get a screwdriver or a cordless drill: open the glove compartment and unscrew the fastenin…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the horn of a Renault Megane located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos