Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Heating Resistor Located in the Renault Megane?

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you will see where the heating resistor is located in the Renault Megane and how to proceed if you need to replace it, a very simple and quick operation. As shown, the resistor is positioned inside the cabin on the driver's side, precisely at the junction between the dashboard and the centre tunnel.

To access it, you will first need to remove the accelerator pedal and then the supporting frame. To replace the resistor, simply unclip the retaining clip, disconnect the connector, and follow the reverse procedure.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

Replacement of the Renault Megane heating resistor
Renault Megane (2002-2010 / Megane 2) In this guide we will see the instructions that will allow us to disassemble and replace the heating resistance of the Renault Megane's cabin. First,…
How to Replace the Fan Resistor on a Renault Megane
How to Replace the Fan Resistor on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Learn how to replace the fan resistor on a Renault Megane. Watch this video for disassembly instructions. Use a lever to remove the plastic next to t…
How to Replace the Cabin Fan Resistor on the Renault Megane
How to Replace the Cabin Fan Resistor on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Follow these steps to remove and replace the cabin fan resistor on the Renault Megane. First, get into the vehicle on the passenger side and start by…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the internal temperature sensor located in the Renault Megane? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos