Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fan Resistor on a Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Blower motor

Learn how to replace the fan resistor on a Renault Megane. Watch this video for disassembly instructions. Use a lever to remove the plastic next to the dashboard, then take out the glove compartment; using a screwdriver, unscrew the cover (where the resistor is located). Disconnect the large connector from the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, reassemble the cover and tighten the screws. Check the correct assembly of the previously installed parts and test the fan's proper operation.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Fan Resistor on the Renault Megane
How to Replace the Cabin Fan Resistor on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Follow these steps to remove and replace the cabin fan resistor on the Renault Megane. First, get into the vehicle on the passenger side and start by…
Replacing the Resistor on a Renault Megane
Replacing the Resistor on a Renault Megane
Renault Megane (2002-2010 / Megane 2) How to replace the cabin fan resistor on a Renault Megane? Get a screwdriver or a cordless drill: open the glove compartment and unscrew the fastenin…
Removing the Fan Resistor on Renault Megane
Removing the Fan Resistor on Renault Megane
Renault Megane (2002-2010 / Megane 2) Is the air fan resistor on your Renault Megane damaged? Here’s how to replace it. Open the front door (passenger side) and remove the trim: use a lev…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the resistor of the passenger compartment fan of the Renault Megane 3? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos