Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Cabin Fan of the Renault Megane

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Blower motor

See other generations:
Video tutorial

In this brief and simple guide, you will learn how to remove and replace the cabin fan of the Renault Megane. First, get inside the vehicle and start by removing the carpet trim located at the bottom left to access the cabin fan; then disconnect its electrical connector and that of the resistor, as shown in the video.

At this point, unscrew the screws securing the cabin fan to remove it, replacing it with the new original one; all that’s left is to install and reassemble everything by applying the reverse procedure!


Updated on 1 July 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Fan on the Renault Megane
Replacing the Cabin Fan on the Renault Megane
Renault Megane (2002-2010 / Megane 2) This guide will show you the main steps to remove and replace the cabin fan on the Renault Megane. First, get into the vehicle and start unscrewing a…
How to Replace the Cabin Fan Resistor on the Renault Megane
How to Replace the Cabin Fan Resistor on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Follow these steps to remove and replace the cabin fan resistor on the Renault Megane. First, get into the vehicle on the passenger side and start by…
Removing the Air Fan on a Renault Megane
Removing the Air Fan on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Removing the air fan on a Renault Megane, let’s see how to proceed. The cabin ventilation fan is located under the dashboard. Remove the covering pla…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the resistor of the passenger compartment fan of the Renault Megane 3? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos