Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Air Fan on a Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Blower motor

Removing the air fan on a Renault Megane, let’s see how to proceed. The cabin ventilation fan is located under the dashboard. Remove the covering plastics of the fan, unscrew the securing screws on the fan cap with a screwdriver. Once this is done, pull off the cap with the fan after disconnecting the power cables. Clean the fan (disassemble the fan and its parts). Refit the previously removed fan (a new one if damaged) and all its components under the glove compartment. Test the fan's operation.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fan Resistor on a Renault Megane
How to Replace the Fan Resistor on a Renault Megane
Renault Megane (2002-2010 / Megane 2) Learn how to replace the fan resistor on a Renault Megane. Watch this video for disassembly instructions. Use a lever to remove the plastic next to t…
Removing the Fan Resistor on Renault Megane
Removing the Fan Resistor on Renault Megane
Renault Megane (2002-2010 / Megane 2) Is the air fan resistor on your Renault Megane damaged? Here’s how to replace it. Open the front door (passenger side) and remove the trim: use a lev…
How to Replace the Cabin Fan Resistor on the Renault Megane
How to Replace the Cabin Fan Resistor on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Follow these steps to remove and replace the cabin fan resistor on the Renault Megane. First, get into the vehicle on the passenger side and start by…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the resistor of the passenger compartment fan of the Renault Megane 3? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos