Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Mirror on a Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part: Side mirror

Is the mirror of the wing mirror broken? Here’s how to replace it. Use a plastic lever to pry between the edge of the mirror frame and the broken mirror. Pry until the clips at the back of the mirror detach from the wing mirror (disconnect the power cable). Replace the damaged part with the new one (be careful not to cut yourself on the glass shards). Ensure the plastic clips snap into the supports of the wing mirror, and reconnect the power connector (if present). Adjust the mirror after installation.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the rear door panel of the Renault Captur.
Disassembly of the rear door panel of the Renault Captur.
Renault Captur (2013-2019 / MK 1) These short and simple steps will show us how to disassemble the rear door panel and window regulator mechanism of the Renault Captur. First, we open…
Removing the Rear Door Panel of a Renault Captur
Removing the Rear Door Panel of a Renault Captur
Renault Captur (2013-2019 / MK 1) Today, we will discover the procedure necessary to remove and replace the rear door panel of a Renault Captur. First, open the rear door and start re…
How to Replace the Key Battery on a Renault Captur?
How to Replace the Key Battery on a Renault Captur?
Renault Captur (2019-2026 / MK 2) Good morning, today’s goal is to replace the key battery on our Renault Captur. Start by sliding the back cover of the key downwards. Then, remove th…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos