Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Panel on Clio 2005

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Door trim panel

See other generations:
Video tutorial

The operations described here apply to all fourth generation Clio models. Remove the Torx screws from the door surround.

Take off the glove compartment handle by removing two plastic covers and then unscrewing the two Torx screws inside. Disconnect any connectors that may be present inside.

Simply pull off the plastic trim. Behind a small plastic cover located behind the opening handle, unscrew the Torx screw.

Disconnect the door opening cable. Pull the panel towards you firmly (the clips holding it to the metal part of the door are very strong).

To refit the new panel, follow the operations in reverse order.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

Guide to replacing the rear side window of the Renault Clio
Guide to replacing the rear side window of the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) This guide provides the main instructions for removing and replacing the rear side window of the Renault Clio. First, open the rear door and start re…
Removing the Rear Door Panel of the Renault Clio
Removing the Rear Door Panel of the Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) This guide briefly outlines the steps to remove and replace the rear door panel of the Renault Clio. First, open the rear door and start unscrewing t…
Guide to disassembling the rear seats of the Renault Clio
Guide to disassembling the rear seats of the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this guide, we will see the main instructions that will allow us to disassemble and remove the rear seats of the Renault Clio, in simple steps. Fi…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos