Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Side Indicator Bulb

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Side marker bulb

To facilitate the replacement of the side indicator bulb, it is advisable to remove the front wheel: lift the vehicle with a jack and remove the wheel. Once the wheel is removed, you can access the side indicator from inside the wheel arch where there is a small window directly opposite the indicator. Disconnect the bulb holder and replace the old bulb with the new one, ensuring it fits correctly in its socket; it is recommended to check its operation before reassembling everything.

Updated on 5 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the turn signal bulb of the Renault Megane.
How to replace the turn signal bulb of the Renault Megane.
Renault Megane (2008-2015 / Megane 3, Megane III) Today we will explain how to replace the bulb of the side turn signal located on the external rearview mirror. To perform the bulb replacement, we ne…
How to replace the turn signal bulb of the Renault Megane 3
How to replace the turn signal bulb of the Renault Megane 3
Renault Megane (2008-2015 / Megane 3, Megane III) Today we will explain how to replace the bulb of the side turn signal located on the exterior rearview mirror of the Renault Megane 3. To perform the…
Side Indicator Bulb Replacement
Side Indicator Bulb Replacement
Renault Megane (2002-2010 / Megane 2) To perform this maintenance, you unfortunately need to remove the wheel arch liner and detach both the bumper and the headlamp, as there is no access…

How to Replace the Gear Shift Gaiter of the Honda CR-V

You can purchase an aftermarket gear shift cover complete with a knob, made of leather with coloured stitching. The disassembly is quite straightforward: start by unscrewing the gear shift knob by twisting it. Next, detach the trim at the base of the gear lever by prying along the edges. Then, remove the chrome trim that holds the gaiter in place, peeling off the leather edges from the plastic support. Apply new double-sided adhesive to the plastic tabs to insert and stick the edges of the new gaiter, securing it with the chrome trim. Finally, fit the gaiter complete with the knob onto the gear lever, securing it with the appropriate screws and reattaching the trim to the tunnel support.

Watch the video!


by ScegliAuto

More videos