Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Car Radio for Replacement

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Car stereo

Enter the security PIN of the car radio and then turn it off. To remove the car radio from the console, insert the appropriate tools into the side slots of the radio to release the retaining springs. At this point, pull the car radio out of the slot, carefully disconnecting the connectors. Remove the cover of the steering column and disconnect the remote control by pressing the plastic tabs with a screwdriver. To reinstall the equipment, simply reconnect the connectors and gently slide the radio back into the slot, taking care not to pinch the electrical cables.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Renaul Clio disassembly of the car radio
Renaul Clio disassembly of the car radio
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) Disassembly of the car radio of a Clio. Let's see how it disassembles. With a lever, we detach the covering of the car radio: let's detach it from th…
Remove the car radio on the Clio
Remove the car radio on the Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Disassemble the car radio of a Renault Clio. Let's see how a new one is removed and mounted inside the dashboard. Insert the disassembly keys into th…
How to install a navigation system on the Clio 3
How to install a navigation system on the Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Do we want to install a new car radio in the dashboard of the Renault Clio? Let's see the disassembly and removal of the old car radio. Insert the ke…

Removing the Front Arm Bushing of a Hyundai Getz

Let's look at removing the front arm bushing of a Hyundai Getz. First, place the car on a column lift and loosen the wheel nuts with a telescopic spanner, then remove the wheel. Use a socket spanner to unscrew the lower securing bolt of the arm and the bolt mounted under the wheel hub, then unscrew the bolts on the upper part of the arm (as shown in the video). Remove the bushing from the bolt housing. Always compare the parts to be replaced with the new ones; if they are suitable, you can install them. Start the installation of the new part: fit the new bushing and tighten all bolts to the specified torque. Double-check the correct tightening of the parts. Refit the wheel to complete the job.

Watch the video!


by ScegliAuto

More videos