Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Repairing the Rear Windscreen Wiper Motor on a Renault Clio 4

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Windshield wipers

See other generations:
Video tutorial

If the rear wiper does not operate when activated, it is likely that the motor is not activating: first, check that power is correctly reaching the motor. Then, remove the trim panel from the rear hatch and take out the wiper motor to test it by powering it directly.

Proceed by removing the plastic cover, gently opening the tabs: you will notice that the contact between the tabs of the motor and the plate is not well connected, so you can resolve this by soldering them together.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wiper Motor on a Renault Clio
How to Replace the Rear Wiper Motor on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this short and simple guide, you will find step-by-step instructions to remove and replace the rear wiper motor on a Renault Clio. First, open the…
How to Remove and Replace the Rear Wiper Blade on a Renault Clio
How to Remove and Replace the Rear Wiper Blade on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Learn how to remove and replace the rear wiper blade on a Renault Clio. Unscrew the securing nut of the wiper arm (where the blade is mounted). Remov…
How to replace the rear windshield wiper of the Renault Clio 3
How to replace the rear windshield wiper of the Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Replacing the rear windshield wiper of your Renault Clio third series is really very simple and in the following guide you will find the description …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos