Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper Motor on a Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019

See other generations:
Video tutorial

In this short and simple guide, you will find step-by-step instructions to remove and replace the rear wiper motor on a Renault Clio. First, open the rear tailgate and start removing the panel from the rear tailgate; then use a drill bit to smooth the rivets of the rear wiper motor, disconnecting its electrical connector to remove it, as shown in the video.

Next, remove the wiper arm to take out and replace the rear wiper motor, reassembling everything!


Updated on 12 July 2026 by ScegliAuto


Related tutorials

Repairing the Rear Windscreen Wiper Motor on a Renault Clio 4
Repairing the Rear Windscreen Wiper Motor on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) If the rear wiper does not operate when activated, it is likely that the motor is not activating: first, check that power is correctly reaching the m…
How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…
How to Remove the Gear Knob of a Renault Clio
How to Remove the Gear Knob of a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Before you begin, sit in the driver's seat of your Renault Clio. Start by prising off and lifting the lower section of the gear lever gaiter. Next, g…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos