Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Pull of a Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

See other generations:
Video tutorial

Today, we will see how to remove the door pull of a third-generation Renault Megane in this video tutorial. First, open the door and remove the door panel (video guide available on our site): once removed, take out the front speaker by unscrewing the screws, and reach inside to grab the door pull; now unscrew the two bolts and remove the screw attached to the body to extract the pull, pulling it out from the speaker hole.

Now, simply replace it with the new one.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Replace the Door Pull on a Renault Megane
Replace the Door Pull on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Need to replace the door pull? Here's how to dismantle it from inside the Megane door. Unscrew the securing screw located in the space of the interna…
Remove the Door Panel of the Renault Megane III
Remove the Door Panel of the Renault Megane III
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, see how to remove the door panel of a third-generation Renault Megane. Start by removing the internal plastic cover of the rear-view m…
How to remove the driver's door panel on a Renault Megane?
How to remove the driver's door panel on a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, you will see how to remove the driver's door panel on a Renault Megane, a very simple and quick operation. First, open the door in …

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the horn of a Renault Megane located? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos