Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Heater Fan from a Renault Clio

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Blower motor

See other generations:
Video tutorial

Before you can start, sit in the front passenger seat of your Renault Clio. Begin by deactivating the front passenger airbag using the designated side switch. Next, unscrew and remove the screws securing the glove compartment to the car, also removing the relevant covers, and finally disconnect the internal light connector of the glove compartment.

Once done, you can remove the glove compartment, gaining access to the cabin fan. Proceed by disconnecting the corresponding connector, then unscrew the securing screws. After completing this step, you can extract the fan, and you will have finished the disassembly.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to replace the cabin fan resistor in a Renault Clio
How to replace the cabin fan resistor in a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) The following steps will illustrate the procedure for disassembling and replacing the blower resistor of the Renault Clio's cabin fan. First, we open…
How to Replace the Heater Fan on Renault Clio
How to Replace the Heater Fan on Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) This guide shows how to replace the fan on a Renault Clio. Remove the plastic cover under the front windscreen using a lever, then unscrew the cover …
Replacement of the Cabin Fan in the Renault Clio
Replacement of the Cabin Fan in the Renault Clio
Renault Clio (1990-1998 / Clio 1, MK 1) In this brief guide, we will go through the steps on how to remove and replace the cabin fan in the Renault Clio. First, open the car's bonnet and st…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos