Do it yourself
Frequently asked questions about cars and motorcycles

Open and Remove the Fuse Box on Renault Megane 2

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Fuse box

See other generations:
Video tutorial

In today's video, you will learn how to open and remove the engine fuse box of a Renault Megane second series, following these simple instructions. First, open the bonnet of the vehicle and locate the fuse box, which is found on the right side of the engine compartment; then disconnect the electrical connector and remove the battery from your car by unscrewing the bolts and disconnecting the terminals.

At this point, also remove the battery tray by unscrewing the fixing screws, and finally take off the plastic cover to access the fuse box; all that is left is to unscrew the screws to remove the entire box!


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Renault Megane (2008-2015 / Megane III, Megane 3) If you are trying to resolve a malfunction of one of the electrical components in the Renault Megane, it is useful to know the location of the fuse b…
Renault Megane (2008-2015 / Megane III, Megane 3) The fuse for the horn is located inside the box situated in the front bonnet of the Renault Megane model 3. To replace it, open the cover of the box …
Renault Megane (2008-2015 / Megane III, Megane 3) In this short and simple guide, you will learn the location of the internal fuse box and where to find its diagram for the Renault Megane, following …

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the Renault Megane air conditioning fuse located? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos