Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of Renault Twingo speakers

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Speaker

Unscrew the screw behind the window lifter buttons, then unscrew the ones located in the lower part of the panel, and finally the screws on the side of the door which also secure the door panel. To remove the internal handle you will have to remove the small screw cover present near (above) it and unscrew the screw below. Once the casing of the handle has been detached from its seat, detach the connection with the help of a small flat screwdriver, as shown in the video. Using a lever, remove the upper plastic relative to the upright. At this point you can finally detach the door panel, disconnect the cables and remove the sound box by unscrewing it from behind.

Posted on 18 December 2020 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front speakers of the Renault Twingo
How to replace the front speakers of the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) This short guide will show us how to disassemble and replace the front door speakers of the Renault Twingo. First of all, let's open the front door o…
Removing the Renault Twingo cabin fan
Removing the Renault Twingo cabin fan
Renault Twingo (2007-2014 / Twingo 2) Let's find out today the main steps that will allow us to disassemble and replace the passenger compartment fan on your Renault Twingo. First we get …
Replacement of the cabin fan resistor of the Renault Twingo
Replacement of the cabin fan resistor of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) In this guide we will see the information related to disassembly and replacement of the cabin fan resistor of the Renault Twingo. First, we get on bo…

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos