Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the speaker in the Renault Twingo 2?

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Speaker

A clarification, the relevance of this video is very much in line with our research, as the steps involved in replacing a car speaker, specifically the one installed in the door, are common to all vehicles, including the Fiat 595 Abarth shown in the video, etc. In addition to the images, we also have the verbal commentary of the video creator present here, who proceeds as follows: Removes the internal handle, the electric window control panel, the trim panel, releasing the perimeter fasteners, and once the locking screws are removed and the power cable connector is disconnected, the aforementioned speaker is removed and the new one is installed.

Posted on 8 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Dashboard Speaker from a Renault Twingo
How to Remove the Dashboard Speaker from a Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Before you begin, sit in the front passenger seat of your Renault Twingo. Start by prising off and removing the upper cover of the speaker using a fl…
How to Remove the Front Speaker from a Renault Twingo
How to Remove the Front Speaker from a Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Today's guide will show you step-by-step instructions on how to remove and replace the front door speaker of a Renault Twingo. First, open the front …
How to replace the front speakers of the Renault Twingo
How to replace the front speakers of the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) This short guide will show us how to disassemble and replace the front door speakers of the Renault Twingo. First of all, let's open the front door o…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos