Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Speakers on Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part: Speaker

Disconnect the battery terminals before removing electrical components. Use a trim removal tool to detach the plastic cover at the corner of the window. With a screwdriver, remove the screws securing the door panel. Once all screws are removed, use the trim tool to detach the door panel, disconnect any power connectors and release cables. Unscrew the screws securing the speaker in the door: remove the speaker and disconnect the power connector.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Door Speakers on a Renault Captur
How to Change the Front Door Speakers on a Renault Captur
Renault Captur (2013-2019 / MK 1) Today, we will see how to remove and replace the front door speakers on a Renault Captur, as well as on a Clio. First, open the front door and start …
How to Reset the Trip Meter on a Renault Captur
How to Reset the Trip Meter on a Renault Captur
Renault Captur (2019-2026 / MK 2) Before you begin, sit in the driver's seat of your Renault Captur. Start by repeatedly pressing the selection button on the right side of the steerin…
How to Fold Down the Rear Seats of a Renault Captur
How to Fold Down the Rear Seats of a Renault Captur
Renault Captur (2019-2026 / MK 2) Before you can begin, open the rear hatch of the boot of your Renault Captur using the button on the electronic key. Start by pushing the front seats…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos