Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the dust cap from the speakers of the Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part: Checks and maintenance

Today we will explain how to remove the dust caps from the upper speakers in a Renault Captur vehicle. To carry out this simple operation, we need to use plastic tools designed for removing dashboard parts or two flathead screwdrivers. We insert the most appropriate tool inside the tweeter cap and, applying pressure from the inside out, we lift it to remove it. After removing the cap, we disconnect the connector to access the speaker. Once maintenance is complete, we reconnect the connector and place the cap to snap it back into the dashboard.

Posted on 29 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Door Speakers on a Renault Captur
How to Change the Front Door Speakers on a Renault Captur
Renault Captur (2013-2019 / MK 1) Today, we will see how to remove and replace the front door speakers on a Renault Captur, as well as on a Clio. First, open the front door and start …
How to Open the Fuel Flap of the Renault Captur?
How to Open the Fuel Flap of the Renault Captur?
Renault Captur (2013-2019 / MK 1) To open the fuel flap of the Renault Captur, pull the lever located on the side of the driver's seat. Pulling the lever upwards will unlock the fuel …
Replacing Speakers on Renault Captur
Replacing Speakers on Renault Captur
Renault Captur (2013-2019 / MK 1) Disconnect the battery terminals before removing electrical components. Use a trim removal tool to detach the plastic cover at the corner of the wind…

Other guides you may be interested in

    Frequently Asked Questions

    • Captur 2013-2019 - What to do if the Renault Captur speedometer does not work? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos