Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs of the Renault Captur 0.9 TCe.

Model: Renault Captur MK 1 - Years 2013-2019
Part: Spark plugs

The following steps will allow us to remove and replace the spark plugs of the Renault Captur 0.9 TCe. First, let's open the car's hood and begin disconnecting the electrical connectors of the spark plug coils; unscrew the screws located at the base to remove them. At this point, we use a socket wrench with an extension to unscrew and remove the spark plugs, replacing them with new ones (of the correct type and having the same thread pitch); we screw in the spark plugs by hand and then gently tighten them with a wrench (preferably a torque wrench), reconnecting the coils and starting the engine!

Posted on 1 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Renault Captur 1 TCe
How to Replace the Spark Plugs on a Renault Captur 1 TCe
Renault Captur (2013-2019 / MK 1) In this video, we will see how to change the spark plugs on a Renault Captur 1 TCe: open the bonnet and remove the cover from the engine block. Disco…
How and When to Change the Engine Oil of the Renault Captur 0.9 TCe
How and When to Change the Engine Oil of the Renault Captur 0.9 TCe
Renault Captur (2013-2019 / MK 1) This guide will provide useful instructions for performing the routine maintenance service, replacing the engine oil and oil filter of the Renault Ca…
How to change the air filter of the Renault Captur I 0.9 TCe
How to change the air filter of the Renault Captur I 0.9 TCe
Renault Captur (2013-2019 / MK 1) In this video we will see how to change the air filter on a Renault Captur I 0.9 TCe: we find the filter in a large black plastic container located i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos