Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Renault Captur 1 TCe

Model: Renault Captur MK 1 - Years 2013-2019
Part: Spark plugs

In this video, we will see how to change the spark plugs on a Renault Captur 1 TCe: open the bonnet and remove the cover from the engine block. Disconnect the connector from each coil, then unscrew the nut on each coil and gently pull it up, as the coils are quite fragile. Using a socket and a spark plug spanner, unscrew the spark plug from the housing, being careful not to drop it inside. Install the new spark plug with the same caution: replace the coil, secure it with the fixing screw, and then reconnect the electrical connector. Repeat the same procedure for the second and third spark plugs.

Posted on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spark plugs of the Renault Captur 0.9 TCe.
How to replace the spark plugs of the Renault Captur 0.9 TCe.
Renault Captur (2013-2019 / MK 1) The following steps will allow us to remove and replace the spark plugs of the Renault Captur 0.9 TCe. First, let's open the car's hood and begin dis…
How to change the air filter of the Renault Captur I 0.9 TCe
How to change the air filter of the Renault Captur I 0.9 TCe
Renault Captur (2013-2019 / MK 1) In this video we will see how to change the air filter on a Renault Captur I 0.9 TCe: we find the filter in a large black plastic container located i…
How and When to Change the Engine Oil of the Renault Captur 0.9 TCe
How and When to Change the Engine Oil of the Renault Captur 0.9 TCe
Renault Captur (2013-2019 / MK 1) This guide will provide useful instructions for performing the routine maintenance service, replacing the engine oil and oil filter of the Renault Ca…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos