Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Renault Captur Key

Model: Renault Captur MK 1 - Years 2013-2019
Part: Key

Replacing the battery (model CR 2032) in the key (commonly known as the fob) of the Renault Captur (the procedure is the same for the Clio IV series) is very straightforward. Start by extracting the metal key, also known as the blade, by pressing the grey button located on the side of the fob. Using the blade, pry between the two halves of the fob at the point where the circular cap is located, beneath which the battery is found. Once the cap is removed, slide out the old battery and insert the new one, ensuring the polarity is correct. Finally, replace the cap and reinsert the blade.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery on a Renault Captur?
How to Replace the Key Battery on a Renault Captur?
Renault Captur (2019-2026 / MK 2) Good morning, today’s goal is to replace the key battery on our Renault Captur. Start by sliding the back cover of the key downwards. Then, remove th…
How to replace the key battery in the Renault Captur 2
Renault Captur (2019-2026 / MK 2) If the smart key of your Renault Captur Mk2 has suddenly stopped working, you likely need to replace the button cell battery inside it. If you are un…
How to change the battery of the key remote control for a Renault Captur.
Renault Captur (2019-2026 / MK 2) Replacing the battery of the key remote of a Renault Captur car is quite simple. Take the vehicle remote and apply pressure by sliding the part of th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos