Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the soft top on Renault Megane 2 Cabrio

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Convertible top

Opening the hood on Renault Megane 2 Cabrio is a very simple operation: at the height of the central tunnel, and more precisely under the armrest, there is the special button that you just need to press for a few seconds and the hood will open. This operation will be enough to make the car decopted. The only inconvenience that can happen to you is the following: in the trunk you have the most classic cover (the cloth) and it must be well in place for the hood to open. So, if you have retracted the cloth to fit something large in the trunk, roll it out until it fits and then press the aforementioned button.

Posted on 22 January 2021 by ScegliAuto

Video tutorial

Related tutorials

Engine oil replacement on Renault Megane
Engine oil replacement on Renault Megane
Renault Megane (1995-2003 / Megane 1) Replacing the engine oil on a Renault Megane? Let's see the oil replacement. We lift the car on a pillar or jack bridge, unscrew the pin of the oil p…
How do you remove the exterior handle of the Renault Megane?
How do you remove the exterior handle of the Renault Megane?
Renault Megane (2008-2015 / Megane 3, Megane III) In order to remove the external handle of the Renault Megane, the door must be opened and the gasket that covers the entire perimeter of the door mus…
How to replace engine oil and oil filter on a Renault Megane
How to replace engine oil and oil filter on a Renault Megane
Renault Megane (1995-2003 / Megane 1) Today in this video I will explain how to change the oil and the engine filter on our Renault Megane, it is not a very complex operation, it is enoug…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos