Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : How to remove the seats on Renault Scenic MK2 J64 (2003)

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Seat
Operation: How to remove the seats on Renault Scenic MK2 J64 (2003)

Let's see in this short video how to remove the rear seats on a Renault Scenic MK2 J64, from 2003. First we open the rear doors and start by bringing the seats forward; to remove them we will simply press the levers at the bottom, lifting the seat in the meantime, as shown in the video. At this point we find the levers laterally, where we will slide and remove the seat from the car; for the front seats, disconnect any electrical connectors located under the seats. For reassembly, just apply the reverse procedure!


Posted on 7 February 2024 by ScegliAuto



How to disassemble the rear seats of the Renault Scenic
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) The steps outlined in this guide will show us how to disassemble and potentially repair or replace the rear seats of the Renault Scenic. First, we op
How to fold the rear seats to make room in a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Let's see how to fold the rear seats to create space in a Renault Scenic. First of all, press the lever on the seat back and move the seat forward: l
Removal of the rear seat on Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Let's see how to remove the rear seats of a Renault scenic. In this video we see how to proceed to lower and remove the rear seats to create space in

    Frequently Asked Questions

    • Scenic 2016-2022 - What problems does the Renault Scenici Grand have? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos