Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Air Vents on Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Air vents

Want to remove the air vent from your car? Let's see how to remove the air vents on a Renault Clio. Start by using a plastic lever to detach the air vents located in the front dashboard (central or side vent). Pry at the frame of the air vent until it detaches from the dashboard plastics. Pull the vent out until it is free from its mounting. Repeat this procedure for the other air vents present on the car's dashboard. Fit the new vent in place of the old one.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Air Vents from Renault Clio 2
Removing Air Vents from Renault Clio 2
Renault Clio (1998-2005 / Clio 2, MK 2) In today's video, you will learn how to remove the air vents from a second series Renault Clio in simple steps. First, get inside the car and take a …
Removing the Air Vents on the Renault Clio MK2
Removing the Air Vents on the Renault Clio MK2
Renault Clio (1998-2005 / Clio 2, MK 2) In this video tutorial, you will learn how to remove and replace the central air vents, as well as the side ones, on the second series Renault Clio i…
How to Remove the Dashboard of a Renault Clio
How to Remove the Dashboard of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) This guide provides step-by-step instructions to remove the dashboard of a Renault Clio. First, get inside the vehicle and start unscrewing the screw…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos