Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulbs on the Renault Clio 4

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

In this video, learn how to remove and replace the rear headlamp bulbs on the fourth series Renault Clio by following these simple steps. First, open the boot and start by removing the plastic cover located on the panel; then remove the bulb holder to access the reverse bulb, replacing it with a new one as shown in the video.

Next, proceed to remove the rear headlamp to access all the other bulbs; disconnect the electrical connector to access the interior light and all the other bulbs!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlight Bulbs on a Renault Clio
How to Replace the Rear Headlight Bulbs on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Learn how to replace the rear headlight bulbs on a Renault Clio. Open the boot lid, and using a screwdriver, unscrew (with a socket or screwdriver wi…
Replace Rear Headlamp Bulb on Renault Clio
Replace Rear Headlamp Bulb on Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Replace the blown bulbs of the rear headlamp on a Renault Clio. Lift the boot and secure it with the prop rod. Locate the inspection cap of the headl…
How to Replace the Rear Light Bulbs on a Renault Clio
How to Replace the Rear Light Bulbs on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Are the rear lights on your Renault Clio not working? In this video, see how to replace the damaged bulbs. Open the boot lid, and using a screwdriver…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos