Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Rear Headlamp Bulb on Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light bulb

See other generations:
Video tutorial

Replace the blown bulbs of the rear headlamp on a Renault Clio. Lift the boot and secure it with the prop rod. Locate the inspection cap of the headlamp on the side of the boot (inside the luggage compartment). Unscrew the plastic nuts of the headlamp and the screws on the side.

Remove the headlamp from the bodywork. Pull out the bulb holders from the headlamp and the damaged bulbs with the help of a screwdriver.

Fit the new bulbs (always the correct type and size) and insert the bulb holder into the headlamp housing. Refit the rear headlamp with the appropriate screws.

Close the trim on the side of the boot.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the Renault Clio 4
How to Replace the Front Headlamp Bulb on the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the front headlamp bulb on the Renault Clio 4, open the bonnet and access the inside of the headlamp corresponding to the bulb to be repla…
How to Replace the Front Headlamp Bulbs on a Renault Clio
How to Replace the Front Headlamp Bulbs on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Learn how to replace the front headlamp bulbs on a Renault Clio. Open the bonnet (by pulling the lever located at the bottom right of the dashboard) …
How to Replace the Front Headlamp Bulb on a Renault Clio?
How to Replace the Front Headlamp Bulb on a Renault Clio?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace the front headlamp bulb on a Renault Clio, open the bonnet to access the components in the engine bay: here you will find the internal pro…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos