Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Clio
  6. : Polishing of the opaque glass of the headlight

Renault Clio - Video tutorial

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Headlight
Operation: Polishing of the opaque glass of the headlight

If the headlight glass becomes opaque to avoid the replacement of the entire unit, it is possible to polish the glass making it as good as new. The 3M cleaning kit is required for the job. Following the attached instructions, initially wash the glass then with the special abrasive paste and with great patience smooth the surface of the glass evenly, then clean with alcohol and a clean rag. Protect the bodywork and spray the special spray until it is perfectly glossy and transparent. Clean the glass with a rag while working in order to remove dirt and ground glass residues.


Posted on 20 July 2023 by ScegliAuto



Headlight regeneration instructions
Renault Clio (1998-2005 / Clio 2, MK 2) The action of the sun but also of the car wash detergents tend, over time, to make the headlights opaque: it is possible to make them shine by perfor
Front headlight regeneration instructions
Renault Clio (1998-2005 / Clio 2, MK 2) Due to the action of atmospheric agents (especially the sun's rays) and the detergents of the car wash, the front headlights tend to become opaque, d
Front headlight regeneration instructions
Renault Clio (1998-2005 / Clio 2, MK 2) The action of the sun. Atmospheric agents but also car wash detergents tend to make the headlights opaque: it is possible to make them shine through

    Frequently Asked Questions

    • Clio 2012-2019 - What are the sidelights on Renault Clio 4? Read Answer
    • Clio 2012-2019 - Replacing the sidelights on Renault Clio 4, where are they located? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos