Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Airbag Warning Light

Model: Renault Kangoo KC, MK 1, KW - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Warning light – error code

See other generations:
Video tutorial

This short tutorial shows how to repair the connection of the airbag warning light in a Renault Kangoo. This operation must be carried out by disconnecting the vehicle's battery.

Using pliers, free the connection of the airbag warning light. Using your fingers, remove the yellow part of the connector to expose the circuit.

Now take a penetrating spray and spray a couple of times on the circuit itself and on the other end of the connection. Restore the contact and reposition the yellow part of the connection as it was before.

Finally, reposition the connection as it was originally.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Airbag Warning Light Check and Reset
Airbag Warning Light Check and Reset
Renault Kangoo (1997-2008 / KC, MK 1, KW) The airbag is an important component for passenger safety, so if the airbag has faults that prevent it from deploying in the event of an accident, a …
How to disassemble the airbag of a Renault Kangoo II
How to disassemble the airbag of a Renault Kangoo II
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this video we will see how to remove the airbag from the steering wheel of a Renault Kangoo II: when working on airbags, it is advisable to always…
How to Remove the Steering Wheel Airbag on a Renault Kangoo
How to Remove the Steering Wheel Airbag on a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) How do you remove the steering wheel airbag from a Renault Kangoo? Before removing the steering wheel, disconnect the battery terminals located in th…

    Frequently Asked Questions

    • Kangoo 2007-2021 - What does the Serv warning light mean on a Renault Kangoo? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos