Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear light of a Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Tail light

Let's see the disassembly of the rear light of a Renault Clio. We lift the hatch to access the sides of the luggage compartment and find the headlight fastening screws. We unscrew the screws placed between the sheet metal and the rear light (with a plastic lever let's help us to get the rear light off). We extract the headlight once it is free and replace the damaged bulbs with new ones (size and voltage are the same). After replacing the damaged bulbs or the headlight, let's get ready to reassemble the headlight with its parts. At the end of the assembly of the rear light, we just have to turn on the lights and check their operation.

Posted on 7 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Third Brake Light on a Renault Clio
How to Replace the Third Brake Light on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video guide, see how to remove the third brake light on a Renault Clio. Lift the car on a column lift, and using a screwdriver, detach the me…
Removing the Clio rear light
Removing the Clio rear light
Renault Clio (1998-2005 / Clio 2, MK 2) Removing the rear light of a Renault Clio? Let's see the disassembly of the rear light. We open the hood of the luggage compartment, unscrew the plas…
How to disassemble the rear headlight of the Renault Clio 3
How to disassemble the rear headlight of the Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Disassembling the rear light of your Renault Clio Mk3 is very simple and to complete the operation you just need to follow a few simple steps. Let's …

How to Install Universal Roof Bars on a Renault Clio

Install universal roof bars on a Renault Clio. Universal roof bars are used on cars with roof rails (fixed bar secured to the roof of the car) and without. Fit the bar kit (as shown in the video) with the bars adjusted according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once you have adjusted the width of the anchoring brackets (measure with a tape measure), tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, fit the safety caps on both sides.

Watch the video!


by ScegliAuto

More videos