Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the seat cables of the Renault Clio?

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Seat

In order to replace the cables that allow the Renault Clio seats to be folded down, the seat must be completely lowered forwards and the cover of the rear part of the backrest raised, so as to be able to access the cables and disconnect them in their lower part. At this point, it will be necessary to lift the levers located in the upper part of the backrest and pull the cables, extracting them completely. At this point, it will be possible to insert the new cables for tipping right from the housing of the lever, connecting them to the mechanism both in the lower and in the upper part.

Posted on 28 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How to remove the seat of the Renault Clio 3
How to remove the seat of the Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Removing the front seat of the Renault Clio 3 is a task that can be done independently; all you need is a 40mm Torx key. To remove the front seat of …
Guide to replacing the front seat of the Renault Clio
Guide to replacing the front seat of the Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Below we will see the main instructions useful for disassembling and replacing the front seat of the Renault Clio, in simple steps. First of all, we …
How to replace the starter motor of the Renault Clio?
How to replace the starter motor of the Renault Clio?
Renault Clio (1998-2005 / Clio 2, MK 2) The replacement of the starter motor of the Renault Clio is carried out by opening the hood, so that the device located inside the engine compartment…

How to Replace the Oil Sump on a Ford Focus

Follow these steps to remove and replace the oil sump on a Ford Focus engine. Lift the car on a column lift and (at your preferred height) use a socket wrench to unscrew the sump plug, allowing the oil to drain into a container (for disposal) and then re-screw the plug. Remove all the side plastics protecting the undercarriage using a battery or manual drill, then unscrew the fastening bolts around the perimeter of the oil sump. After removing the bolts from the sump, detach it from the engine block along with the gasket using a screwdriver as leverage. Clean everything and refit the new part.

Watch the video!


by ScegliAuto

More videos