Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Renault Megane 4

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part: Warning light – error code

In this video, discover how to reset the service light on a Renault Megane 4. To start, turn on the ignition. Now scroll using the buttons on the steering wheel, as shown at minute 0:20. You need to navigate to the service message in the menu. At this point, press the OK button, as shown at 0:30. Hold it down until the message indicating the new mileage target before the next check appears. Press OK again and keep holding it. After a few seconds, you will see the mileage indication start to flash. When the flashing stops, you can release the button and the reset will be complete.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, we can see how to reset the service in the Renault Megane, an extremely simple and quick operation, to be carried out only once all…
Renault Megane (2015-2023 / Megane 4, Megane IV) In this tutorial, you will see how to reset the service light in the Renault Megane, a very simple and quick operation that should only be done once …
Renault Megane (2015-2023 / Megane 4, Megane IV) In this tutorial we can see how to reset the service in the Renault Megane, an extremely simple and fast operation to be carried out only after compl…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - What are the lights of the Renault Megane? Read answer
    • Megane 2015-2023 - How to reset tripmeter on Renault Megane? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos