Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on the Renault Megane 3

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Warning light – error code

This video tutorial shows the procedure to reset the service light on the Renault Megane 3. This procedure can be useful if the light remains on after servicing the vehicle. The procedure to reset is: first, start the engine, then press the button on the lever located on the right side of the steering wheel until you reach the service message, then press the button for 10 seconds. After 10 seconds, the message will flash, indicating that the reset has been successful.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2015-2023 / Megane 4, Megane IV) The service light, related to the car service, on a Renault Megane mk4 model vehicle activates when it is necessary to perform operations that includ…
Renault Megane (2002-2010 / Megane 2) The service light on the instrument panel of your Renault Megane second series is just a reminder to remind you to get the vehicle serviced. If it co…
Renault Megane (2002-2010 / Megane 2) Today, see how to reset the service light for the engine oil change on the Renault Megane. First, get inside the vehicle and turn on the instrument c…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2002-2010 - How to enter the unlock code on the 2007 Renault Megane radio? Read answer
    • Megane 2008-2015 - What are the lights of the Renault Megane? Read answer
    • Megane 2015-2023 - How to reset tripmeter on Renault Megane? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos