Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the injectors of the Renault Megane 1.5 DCI

Model: Renault Megane Megane 3, Megane III - Years 2008-2015
Part: Fuel injectors

We see in this video the main instructions that will allow us to disassemble and replace the diesel injectors of the Renault Megane 1.5 DCI. First we open the engine hood and remove the top plastic cover; then disconnect the air hose, unscrewing the screws of the clamps, as shown in the video. At this point we are going to unscrew our injectors, using a 17 mm wrench to remove the high pressure pipes; then we remove the injectors with an 11mm wrench. We replace the injectors with new ones, following the video to the end!

Posted on 20 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the injectors of the Renault Megane?
How do you replace the injectors of the Renault Megane?
Renault Megane (2002-2010 / Megane 2) To replace the injectors of the Renault Megane, you will need to open the hood so that you can access the components located in the engine compartmen…
Replacing the Renault Megane 1.4 DCI glow plugs
Replacing the Renault Megane 1.4 DCI glow plugs
Renault Megane (2008-2015 / Megane 3, Megane III) Let's see in this short and simple guide how to remove and replace the engine glow plugs of the Renault Megane 1.5 DCI, third series. First we open t…
Replacing the timing belt of the Renault Megane 2 1.5 DCI
Replacing the timing belt of the Renault Megane 2 1.5 DCI
Renault Megane (2002-2010 / Megane 2) Today we will see, in this guide, the main steps that will allow us to change the timing belt of the Renault Megane second series, with a 1.5 DCI eng…

How to Remove the Gear Knob on an Opel Astra

How to replace the gear knob on an Opel Astra? Follow these steps: use a plastic lever to disconnect the leather gaiter frame (if you need to replace it). Grip the knob with both hands and pull it upwards (with a strong and decisive motion) until it comes off the gear stick. For installation: fit the new gaiter and position it on the centre tunnel, take the new knob and push it onto the stick, tightening it until fully threaded. Test the movement of the stick on the centre tunnel to ensure the knob is correctly fitted.

Watch the video!


by ScegliAuto

More videos