Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Glow Plugs on the Renault Megane 1.4 DCI

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Glow plugs

In this brief and simple guide, see how to remove and replace the glow plugs in the engine of the Renault Megane 1.5 DCI, third series. First, open the bonnet of your car and remove the upper plastic cover; then disconnect the intake hose by unscrewing the clamp screw. At this point, disconnect the four electrical connectors of the glow plugs; use a socket spanner with an extension to unscrew and remove them. Screw in the new glow plugs by hand, then tighten with a spanner, following the video tutorial to the end for reassembly!

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glow Plugs on a Renault Megane 1.5 DCi
How to Replace the Glow Plugs on a Renault Megane 1.5 DCi
Renault Megane (2008-2015 / Megane III, Megane 3) This brief video tutorial shows how to replace the glow plugs on a third-generation Renault Megane, produced from 2008 to 2015. It is advisable to di…
How to Replace the Glow Plugs in a Renault Megane?
How to Replace the Glow Plugs in a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, see how to replace the glow plugs in a Renault Megane 3, a very simple operation. First, ensure the engine is completely cold, then…
Replacing the Injectors on the Renault Megane 1.5 DCI
Replacing the Injectors on the Renault Megane 1.5 DCI
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, we will go through the main instructions to remove and replace the diesel injectors on the Renault Megane 1.5 DCI. First, open the bon…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos