Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs on a Renault Megane 1.5 DCi

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Glow plugs

This brief video tutorial shows how to replace the glow plugs on a third-generation Renault Megane, produced from 2008 to 2015. It is advisable to disconnect the battery before performing this operation. First, open the bonnet and remove the air duct pipes as shown in the video. Once done, remove the plastic engine cover to access the glow plugs. Now, disconnect the glow plug cables and then remove the plugs using a 10 mm socket with an extension. Finally, install new glow plugs following the reverse procedure.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Glow Plugs on the Renault Megane 1.4 DCI
Replacing the Glow Plugs on the Renault Megane 1.4 DCI
Renault Megane (2008-2015 / Megane III, Megane 3) In this brief and simple guide, see how to remove and replace the glow plugs in the engine of the Renault Megane 1.5 DCI, third series. First, open t…
How to Replace the Glow Plugs in a Renault Megane?
How to Replace the Glow Plugs in a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, see how to replace the glow plugs in a Renault Megane 3, a very simple operation. First, ensure the engine is completely cold, then…
How to Replace the Glow Plugs on Renault Megane
How to Replace the Glow Plugs on Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Want to remove the glow plugs from your Renault Megane but not sure how? In this detailed video, follow these steps: pull the engine compartment rele…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos