Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : How to replace glow plugs in Renault Megane?

Renault Megane - Video tutorial

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Glow plugs
Operation: How to replace glow plugs in Renault Megane?

In this tutorial we can see how to replace the glow plugs in Renault Megane 3, a very simple operation. First of all, make sure that the engine is completely cold, then open the bonnet and disconnect the negative battery terminal. We then remove the intake manifold, disassemble the air filter box and disconnect the glow plug connectors. At this point we can grab the first of them with a 10mm wrench, unscrew it gently and extract it from the head. Finally, assemble the spare following the reverse procedure and repeat the operation for the remaining glow plugs.


Posted on 29 December 2022 by ScegliAuto



How to replace the glow plugs on a Renault Megane 1.5 DCi
Renault Megane (2008-2015 / Megane III, Megane 3) In this short video tutorial, let's see how to replace the glow plugs of a third generation Renault Megane, model produced from 2008 to 2015. It is a
Replacing the Renault Megane 1.4 DCI glow plugs
Renault Megane (2008-2015 / Megane III, Megane 3) Let's see in this short and simple guide how to remove and replace the engine glow plugs of the Renault Megane 1.5 DCI, third series. First we open t
How to replace the glow plugs on Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Do you want to remove the glow plugs on your Renault Megane car and don't know how to do it? Let's see in this detailed video how to proceed with the

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos