Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs on Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Glow plugs

Want to remove the glow plugs from your Renault Megane but not sure how? In this detailed video, follow these steps: pull the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it in place. Remove the soundproofing panel covering the engine, and also remove the air box if necessary. Unscrew the glow plugs using a socket wrench with various sockets. Take the new glow plug and insert it into the engine head with the socket wrench. Finally, refit the plastic head cover panel.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glow Plugs in a Renault Megane?
How to Replace the Glow Plugs in a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, see how to replace the glow plugs in a Renault Megane 3, a very simple operation. First, ensure the engine is completely cold, then…
Replacing the Glow Plugs on the Renault Megane 1.4 DCI
Replacing the Glow Plugs on the Renault Megane 1.4 DCI
Renault Megane (2008-2015 / Megane III, Megane 3) In this brief and simple guide, see how to remove and replace the glow plugs in the engine of the Renault Megane 1.5 DCI, third series. First, open t…
How to Replace the Glow Plugs on a Renault Megane 1.5 DCi
How to Replace the Glow Plugs on a Renault Megane 1.5 DCi
Renault Megane (2008-2015 / Megane III, Megane 3) This brief video tutorial shows how to replace the glow plugs on a third-generation Renault Megane, produced from 2008 to 2015. It is advisable to di…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos