Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Front Headlamp Bulb on the Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, you will learn how to remove and replace the front headlamp bulb on the Renault Clio in simple and quick steps. First, open the bonnet of your car by pulling the lever inside, and start by removing the plastic protective cap over the bulbs; then disconnect the electrical connector and unclip the metal spring found before the bulb, as shown in the video.

Now you can remove and replace the bulb with a new one of the correct type (in this case, type H7); if necessary, also replace the main beam bulb!


Updated on 16 May 2026 by ScegliAuto


Related tutorials

Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Today we will explain how to replace the front headlight bulb of a 2011 Renault Clio on your own. It is important during the replacement operation to…
Renault Clio (1990-1998 / Clio 1, MK 1) In the following guide, you will find a description of the procedure that allows you to correctly replace the headlight bulb of your first-generation…
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the front headlight bulb on a Renault Clio 4, open the bonnet to access the rear of the headlight corresponding to the bulb to be replaced…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos